Site Report: JBER-Ft. Rich Arctic Valley Road Utility Pole 8783 DA121
Site Name: | JBER-Ft. Rich Arctic Valley Road Utility Pole 8783 DA121 |
---|---|
Address: | Utility Pole 8783 Near Corner of Arctic Valley Road and 4th Street, Formerly known as Fort Richardson before 10/01/2010, Fort Richardson (JBER), AK 99505 |
File Number: | 2102.38.074 |
Hazard ID: | 26635 |
Status: | Cleanup Complete |
Staff: | No Longer Assigned, 9074655229 dec.icunit@alaska.gov |
Latitude: | 61.244962 |
Longitude: | -149.706266 |
Horizontal Datum: | WGS84 |
![]() | ![]() |
![]() | ![]() |
We make every effort to ensure the data presented here is accurate based on the best available information currently on file with DEC. It is therefore subject to change as new information becomes available. We recommend contacting the assigned project staff prior to making decisions based on this information.
Problems/Comments
DEC received a spill report on 9/26/2016 noting that a contractor was replacing utility pole #8783 on 9/20/2016 and encountered some contaminated soil they believed smelled like gasoline or diesel fuel. They reported the affected area as 4' x 6'. Contaminated soil that was excavated for replacement of the pole was stockpiled on site. One soil sample was taken from the soil stockpile from a depth of 6-inches. The sample was analyzed for gasoline range organics, diesel range organics (DRO), residual range organics, volatile organic compounds, polycyclic aromatic hydrocarbons, total metals, and polychlorinated biphenyls. DRO, chromium, and arsenic were confirmed above DEC cleanup levels. Transport of the contaminated soil was approved to ASR for remediation. No sampling was done to characterize the excavation limits and it was reported that the excavation was backfilled. Further characterization may be required.
Action Information
Action Date | Action | Description | DEC Staff |
---|---|---|---|
11/17/2016 | Site Added to Database | A new site has been added to the database | Mitzi Read |
11/17/2016 | Spill Transferred from Prevention Preparedness and Response Program | Spill transferred by PPR staff Mike Evans. Spill no. 16239926402; spill date = 10/20/16; substance = unknown; quantity = unknown; source = unknown. | Mitzi Read |
2/14/2017 | Exposure Tracking Model Ranking | Initial ranking with ETM completed for source area id: 79990 name: Arctic Valley Road Utility Pole 8783 | Louis Howard |
2/21/2020 | Update or Other Action | Site Characterization Report received. Site characterization UVOST probes, soil borings, & analytical sampling results did not indicate the presence of any remaining POL contamination related to the unknown release at power pole #8783. However, the analytical results did indicate that a presence of pentachlorophenol (PCP), a known industrial wood preservative, has occurred &/or is occurring, because this site is located in a powerline corridor. PCP detected at the site is not attributable to the original unknown fuel release at power pole #8783 & is likely a result of leaching from utility poles present on site. PCP is a CERCLA-regulated hazardous substance. PCP is an EPA registered pesticide (pesticide chemical number 063001) & is used industrially as a wood preservative for power line poles, cross arms, fence posts, & the like. With this site being located in a power pole corridor, PCP is not subject to liability under CERCLA because it is an EPA registered pesticide & was introduced into the environment due to its proper application & intended use as stated in the United States Code, Title 42, The Public Health & Welfare, Chapter 103, CERCLA, Subchapter I, Hazardous Substances Releases, Liability, Compensation, Section 9607, Liability (42 U.S.C 9607(i)). Additionally, the most stringent EPA Regional Screening Level [November 2019], target cancer risk of 1 x 10-6 with a target hazard quotient of 1.0 (because there is only one contaminant of concern [COC] at the site), Resident Soil for PCP is 1.0 mg/kg. All detected concentrations of PCP are below this value. [Generally, if you are screening only one contaminant, the THQ=1.0 table can be used. Generally, if you are screening multiple chemicals it is preferred, to use the THQ=0.1 tables. The rationale for using THQ=0.1 for screening is that when multiple contaminants of concern are present at a site or one or more are present in multiple exposure media, the total hazard index could exceed 1.0 if each were screened at the HQ of 1.0.] | Louis Howard |
3/4/2020 | Cleanup Complete Determination Issued | Cleanup Complete Determination Letter Issued | William Schmaltz |
Contaminant Information
Name | Level Description | Media | Comments |
---|---|---|---|
DRO | < Method 2 Most Stringent | Soil | No DRO detected above applicable cleanup level during 2019 site investigation. |
Control Type
Type | Details |
---|---|
No ICs Required |
Requirements
Description | Details |
---|---|
Advance approval required to transport soil or groundwater off-site. | |
Movement or use of contaminated material (including on site) in a manner that results in a violation of the water quality standards is prohibited (18 AAC 70) |
No associated sites were found.