Alaska Department of Environmental Conservation Division of Water

EDMS Anchorage Airport General Permit (ANC-GP) NOI Modification

Instructions for completing the modification form for Stormwater Discharges Associated with Activity under an APDES Ted Stevens Anchorage International Airport General Permit (ANC-GP) using EDMS.

Do not enter information from the original NOI. You will be presented with the information DEC has on file. Review and edit/update only the information you wish to change. Certify and submit to DEC for review and processing.

Contact Information

Enter the name of the contact person, title, and the legal name of the firm, public organization, or any other entity that operates the facility described in this application. An operator of a facility is a legal entity that controls at least a portion of site operations and is not necessarily the site manager. Enter the operator’s mailing address, telephone number, and e-mail address. Correspondence for the NOI will be sent to this address.

Enter contact information for the Applicant (Responsible Official), SWPPP contact, and Application preparer, and Billing contact. Enter the name of the contact person and the legal name of the firm, public organization, or any other public entity that is responsible for accounts payable for this facility. Correspondence for billing purposes will be sent to this address. See 18 AAC 72.956 for applicable authorization fee to be paid with the submittal of the NOI.

Multiple roles may be selected per contact.

Facility Information

Indicate whether the facility has been previously covered by an APDES DEC permit. If “Yes” enter the permit authorization number that the facility was covered under.

Enter complete street address, including city, state, zip code, and county or similar government subdivision of the facility. Do NOT use a P.O. Box. If the facility lacks a street address, indicate the general location of the site (e.g., Intersection of State Highways 61 and 34). Complete facility location information must be provided for permit authorization to be granted.

Select correct borough for facility location.

Enter the latitude and longitude of the facility in decimal degrees format with up to 6-digit accuracy. You can obtain your facility’s latitude and longitude through Global Positioning System (GPS) receivers, internet map service, U.S. Geological Survey (USGS) quadrangle or topographic maps, or EPA’s web-based siting-tools, among other methods. For consistency, DEC requests that measurements be taken from the approximate center of the facility.

Select the method used to determine geographic coordinates.

Select the North American Industry Classification System code (NAICS) that best describes the primary activity your facility is primarily engaged as defined in MSGP Appendix D.

Select the Standard Industry Code (SIC) code that best describes the primary activity your facility is primarily engaged.

Enter the estimated area of industrial activity at your facility exposed to stormwater, in acres. Indicate to the nearest tenth of an acre. Note: 1 acre = 43,560 sq. ft.

Identify the type(s) of category of Operator.

Identify Type(s) of Activities at the facility.

Discharge Information

Indicate where stormwater from your site will be discharged into which drainage basin.

SWPPP Documents

Your SWPPP is to be submitted with the NOI as required in Part 5 of the ANC-GP. You must keep a copy of your SWPPP on-site or otherwise make it available to facility personnel responsible for implementing provisions of the permit.

Sector/Subsector Information

Select the Sector and Subsector that apply to each outfall.

Review

This step allows you to review the form to confirm the form is populated completely and accurately, prior to certification and submission.

Certify and Submit

This step allows you to certify the form as complete and accurate and to submit the form to DEC for review and processing.

At the time of submission, it will be transmitted to DEC and it will become part of the public record.